Lead Extruder

Specifications

Diameter Of Screw:	150mm	Extruding Output:	Pure Lead: 30~45kg/min; Soft Alloy Lead: 15~30kg/min; Hard Alloy Lead: 13~24kg/min
Rotating Speed Of Screw:	Pure Lead: 6~12rpm; Soft Alloy Lead: 6~9rpm; Hard Alloy Lead: 6~9rpm	Lead Melting Furnace:	18t
Lead Holding Furnace:	10t	Die Stock:	Ф 20~Ф80, Ф 40~Ф 110
Cable Dia Scope:	Φ36~Φ152mm	Lead Sheathing Scope:	Φ40~Φ160mm
Thickness Of Lead Layer:	1.6~4.6mm	Lead Layer Tolerance:	± 0.2～0.5mm
Internal Water Circulating Consumption:	6~8t/h	Cable Diameter:	Normal Diameter ф8mm～ф130mm
Lead Coating Diameter:	Normal Outer Diameter ф10mm～ф135mm	Main Motor Power:	110kw
Heating Power Of Extrusion Tube:	24kw	Small Die Stock Heating Power:	24kw
Large Die Stock Heating Power:	30kw	ΩPipe Heating Power:	3kw
18 Tons Furnace Heating Power:	141kw	10 Tons Furnace Heating Power:	103kw
Other Auxiliary Pump Parts:	~10kw	Total Power:	～420kw (excluding Retractable)
Power Supply:	AC380V 50Hz	Loading Unit With Rollers:	1 Set
18 Ton Lead Melting Furnace:	1 Set	10 Ton Lead Holding Furnace:	1 Set
ΩPipe:	2 Pieces	100/5 Type Extrusion Host:	1 Set (optional With Large And Small Die Stock)
Gear Lubricant Oil System:	1 Set	Internal Water Circulating & Cooling System:	1 Set
Rear Water Cooling System:	1 Set	Flow Controller (including Full Automatic Auxiliary System):	1 Set
Electrical Control System:	1 Set	Power Source:	380V, 50Hz
Total Installed Capacity:	195KVA （excluding Pay-off & Take-up, Etc.）	Speed Regulator For AC Motor:	G120 Series , Siemens, China
Temperature Controller:	RKC, Japan	General Low Voltage Device:	Within63A Schneider, France
PLC:	S7-1200 Series , Siemens, China	Touch Screen:	“WEINVIEW”10`` Color
Display On Touch Screen:	1.main Machine And Auxiliary Devices 2.Temperature Of Each Heating Zone And Set Status 3.Automatic Proportional Valve And Set Status 4.Heating Faults And Motor Faults 5.Illustrated Pictures For Each Heating Zone For Watching Easily And Directly 6.Cooling W	Display On Recorder(equipped With Printer Port To Collect The Data):	1.Current Of Main Machine And Diagram Of Rotary Speed 2.Temperature Diagrams Of Upward, Middle And Below Extruding Barrel 3.Linear Diagram(signal From Spooling Dancer) 4.Diagram Of Upward, Middle And Below Automatic Proportional Valve 5.Oil Temperature Dia
Alarm:	Abnormal Control Of Main Motor, Low Pressure Or Over Temperature Of Lubricant Oil	Control Of Feeding Material For Pot:	Automatically Open Feeding Motor After Liquefied Lead Alarm
Electrical Control Cabinet:	Fully Closed Structure Similar To Rittal, Equipped With Air Condition To Ensure The Cleanness In Cabinet And Normal Work Of System	Heating For Omega Pipe:	Adopt Jumping Heating Method To Ensure Normal Work
Heating Die Stock:	Divide Into Three Zones To Ensure Easy Operation

Product Description

Continuous Lead Extruder Machine

This advanced lead extruder machine is engineered for the seamless sheathing of cables with lead and the continuous wrapping and vulcanization of rubber pipes. Designed for efficiency and precision, it offers a robust solution for wire and cable manufacturing, ensuring consistent quality and reduced material consumption.